manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 263 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 263

3-116

Convenient features of your vehicle

Parking Distance Warning
(Reverse) system Precautions

• The Parking Distance Warning

(Reverse) system may not operate
consistently in some circum-
stances depending on the speed of
the vehicle and the shapes of the
objects detected.

• The Parking Distance Warning

(Reverse) system may malfunction
if the vehicle bumper height or sen-
sor installation has been modified
or damaged.

Any non-factory

installed equipment or accessories
may also interfere with the sensor
performance.

• The sensor may not recognize

objects less than 30 cm (12 in.)
from the sensor, or it may sense an
incorrect distance. Use caution.

• When the sensor is blocked with

snow, dirt, debris, or ice, the rear
parking assist system may be inop-
erative until the snow or ice melts,
or the debris is removed. Use a
soft cloth to wipe debris away from
the sensor.

• Do not push, scratch or strike the

sensor with any hard objects that
could damage the surface of the
sensor. Sensor damage could
occur.

• Do not spray the sensors or its sur-

rounding area directly with a high
pressure washer. Doing so may
cause the sensors to fail to operate
normally.

Parking Distance Warning
(Reverse/Forward) System
(if equipped)

[A] : Front Sensor, [B] : Rear Sensor

Extreme caution should always
be taken to avoid accidents or
vehicle injuries. Do not solely
rely on the Parking Distance
Warning (Reverse) system.
Always drive safely and cau-
tiously, especially when back-
ing up in reverse.

WARNING  

OOSEV048018N

OOSEV048017

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments