manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 373 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 373

5-72

Driving your vehicle

• Driving where the road is merg-

ing/dividing

The BCW system may not operate
properly when driving where the
road is merging/dividing. In certain
instances, the system may not detect
the vehicle in the next lane.
Always pay attention to road and
driving conditions, while driving.

• Driving on a slope
The BCW system may not operate
properly when driving on a slope. In
certain instances the system may not
detect the vehicle in the next lane.
Also, in certain instances, the system
may recognize the ground or struc-
tures.
Always pay attention to road and
driving conditions, while driving.

• Driving where the heights of the

lanes are different

The BCW system may not operate
properly when driving where the
heights of the lanes are different.
In certain instances, the system may
not detect the vehicle on a road with
different lane heights (i.e. underpass
joining section, grade separated
intersections, etc.).
Always pay attention to road and
driving conditions, while driving.

OTM058111

OOSEV058114N

OOSEV058113N

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments