manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 355 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 355

5-54

Driving your vehicle

FCA Sensor

In order for the FCA system to oper-
ate properly, always make sure the
sensor cover or sensor is clean and
free of dirt, snow, and debris.

Dirt, snow, or foreign substances on
the sensor cover or sensor may
adversely affect the sensing perform-
ance of the sensor.

• Do not apply license plate frame

or foreign objects such as a
bumper sticker or a bumper
guard near the radar sensor.
Doing so may adversely affect
the sensing performance of the
radar.

• Always keep the radar sensor

and cover clean and free of dirt
and debris.

• Use only a soft cloth to wash the

vehicle. Do not spray pressur-
ized water directly on the sensor
or sensor cover.

• Be careful not to apply unneces-

sary force on the sensor or sen-
sor cover. If the sensor is
forcibly moved out of proper
alignment, the FCA system may
not operate correctly. In this
case, a warning message may
not be displayed. Have the vehi-
cle inspected by an authorized
HYUNDAI dealer.

• If the front bumper becomes

damaged in the area around the
sensor, the FCA system may not
operate properly. Have the vehi-
cle inspected by authorized
HYUNDAI.

• Use only genuine parts to repair

or replace a damaged sensor or
sensor cover. Do not apply paint
to the sensor cover.

NOTICE

OOSEV058029N

■

Front radar

OOSEV058025N

■

Front camera

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments