manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 449 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 449

6-22

What to do in an emergency

2. Remove the hole cover by press-

ing the lower part of the cover on
the front or rear bumper.

3. Install the towing hook by turning it

clockwise into the hole until it is
fully secured.

4. Remove the towing hook and

install the cover after use.

Emergency Towing

If towing is necessary, we recom-
mend you have it done by an author-
ized HYUNDAI dealer or a commer-
cial tow truck service.
If towing service is not available in an
emergency, your vehicle may be
temporarily towed using a cable or
chain secured to the emergency tow-
ing hook at the front (or rear) of the
vehicle.
Use extreme caution when towing
the vehicle with a cable or chain. A
driver must be in the vehicle to steer
it and operate the brakes.
Towing in this manner may be done
only on hard-surfaced roads for a
short distance and at low speeds.

OOSEV068011N

OOSEV068012

■

Front

■

Rear

The driver must be in the vehi-
cle for steering and braking
operations when the vehicle is
being towed. Passengers other
than the driver must not be in
the vehicle.

CAUTION

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments