manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 134 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 134

2-56

Safety system of your vehicle

After complete inflation, the air bag
immediately starts deflating, enabling
the driver to maintain forward visibili-
ty and the ability to steer or operate
other controls.

What to Expect After an Air
Bag Inflates 

After a frontal or side air bag inflates,
it will deflate very quickly. Air bag
inflation will not prevent the driver
from seeing out of the windshield or
being able to steer. Curtain air bags
may remain partially inflated for
some time after they deploy.

OHM039104N

■

Driver’s front air bag (3)

OLMB033057

■

Passenger’s front air bag

To prevent objects from becom-
ing dangerous projectiles when
the passenger's air bag inflates:

•

Do not install or place any
objects (drink holder,

CD

holder, stickers, etc.) on the
front passenger's panel above
the glove box where the pas-
senger's air bag is located.

•

Do not install a container of
liquid air freshener near the
instrument cluster or on the
instrument panel surface.

WARNING  

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments