manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 212 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 212

3-65

Con

v

enient f

e

atur

es of y

our v

ehicle

3

Low Key Battery 

This warning message is displayed if
the battery of the smart key is dis-
charged while changing the POWER
button to the OFF position.

Battery discharging due to
external electrical devices

This message is displayed if the bat-
tery voltage is weak due to any non-
factory electrical accessories (ex.
dashboard camera) while parking.
Be careful that the battery is not dis-
charged.
If the warning message appears after
removing the non-factory electrical
accessories, have the vehicle inspect-
ed by an authorized HYUNDAI dealer.

Door, Hood, Tailgate open 
indicator

This warning is displayed if any door
or the hood or the tailgate is left
open.

The warning will indicate

which door is open in the display.

Sunroof open indicator 
(if equipped)

This warning is displayed if you turn
off the engine when the sunroof is
open.
Close the sunroof securely before
leaving your vehicle.

OOSEV048114

Before driving the vehicle, you
should confirm that the door/
hood/tailgate is fully closed.
Also, check there is no door/
hood/tailgate open warning light
or message displayed on the
instrument cluster.

CAUTION

OOSEV048113

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments