manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 388 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 388

5-87

Dri
ving y

o

ur v

ehicle

5

The Driver Attention Warning sys-
tem utilizes the camera sensor on
the front windshield for its opera-
tion. To keep the camera sensor in
the best condition, you should
observe the followings:
• Do not disassemble the camera

temporarily to tint the window or
to attach any types of coatings
and accessories. If you disas-
semble a camera and assemble
it again, take your vehicle to an
authorized HYUNDAI dealer and
have the system checked for cal-
ibration.

• NEVER locate any reflective

objects (i.e. white paper, mirror)
over the dashboard. Any light
reflection may cause a malfunc-
tion of the Driver Attention Alert
(DAW) system.

• Pay extreme caution to keep the

camera sensor out of water.

• NEVER arbitrarily disassemble

the camera assembly, nor apply
any impact on the camera
assembly.

NOTICE

•

The Driver Attention Warning
(DAW) system is not a substi-
tute for safe driving practices,
but a convenience function
only. It is the responsibility of
the driver to always drive cau-
tiously to prevent unexpected
and sudden situations from
occurring. Pay attention to the
road conditions at all times.

•

The system may suggest a
break according to the dri-
ver's driving pattern or habits
even if the driver doesn't feel
fatigue.

•

The driver, who feels fatigued,
should take a break, even
though there is no break sug-
gestion by the Driver Attention
Warning (DAW) system.

WARNING  

The Driver Attention Warning
(DAW) system may not properly
operate with limited alerting in
the following situations:

•

The lane detection perform-
ance is limited. (For more infor-
mation, refer to "Lane Keeping
Assist (LKA) system" in this
chapter.) 

•

The vehicle is driven erratical-
ly or is abruptly turned for
obstacle avoidance (e.g. con-
struction area, other vehicles,
fallen objects, bumpy road).

•

Forward drivability of the vehi-
cle is severely undermined
(possibly due to wide variation
in tire pressures, uneven tire
wear-out, toe-in/toe-out align-
ment).

•

The vehicle drives on a curvy
road.

•

The vehicle drives on a bumpy
road.

CAUTION

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments