manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 164 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 164

3-17

Con

v

enient f

e

atur

es of y

our v

ehicle

3

Tilt Steering / Telescopic
Steering

When adjusting the steering wheel to
a comfortable position, adjust the
steering wheel so that it points
toward your chest, not toward your
face. Make sure you can see the
instrument cluster warning lights and
gauges. After adjusting, push the
steering wheel both up and down to
be certain it is locked in position.
Always adjust the position of the
steering wheel before driving.

To adjust the steering wheel angle
and height:
1. Pull down the lock-release lever (1).
2. Adjust the steering wheel to the

desired angle (2) and distance for-
ward/back (3).

3. Pull up the lock-release lever to

lock the steering wheel in place.

Information

Sometimes the lock release lever may
not engage completely. This may
occur when the gears of the locking
mechanism do not completely mesh.
If this occurs, pull down on the lock-
release lever, readjust the steering
wheel again, and then pull back up on
the release lever to lock the steering
wheel in place.

i

NEVER adjust the steering
wheel while driving. This may
cause loss of vehicle control
resulting in an accident.

WARNING  

OOS047006

While adjusting the steering
wheel height, please do not
push or pull it hard since the fix-
ture can be damaged.

CAUTION

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments