manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 403 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 403

5-102

Driving your vehicle

In traffic situation

Use switch or pedal to accelerate

• In traffic, your vehicle will stop if the

vehicle ahead of you stops. Also, if
the vehicle ahead of you starts
moving, your vehicle will start as
well. However, if the vehicle stops
for more than 3 seconds, you must
depress the accelerator pedal or
push up the toggle switch  (RES+)
or push down the toggle switch
(SET-) to start driving.

• If you push the smart cruise control

toggle switch (RES+ or SET-) while
Auto Hold and smart cruise control
is operating the Auto Hold will be
released regardless of accelerator
pedal operation and the vehicle will
start to move. The AUTO HOLD
indicator changes from green to
white.

OIK057107L

Take the following precautions :

•

Always set the vehicle speed
under the speed limit.

•

If the Smart Cruise Control is
left on, (cruise indicator light
in the instrument cluster is
illuminated) the Smart Cruise
Control can be activated unin-
tentionally. Keep the Smart
Cruise Control system off
(cruise indicator light OFF)
when the Smart Cruise
Control is not in use, to avoid
inadvertently setting a speed.

•

Use the Smart Cruise Control
system only when traveling
on open highways in good
weather.

•

Do not use the Smart Cruise
Control when it may not be
safe to keep the vehicle at a
constant speed.

•

Do not use when:
- Driving in heavy traffic or

when traffic conditions
make it difficult to drive at a
constant speed

WARNING  

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments