manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 154 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 154

3-7

Con

v

enient f

e

atur

es of y

our v

ehicle

3

When possible, avoid keeping the
remote key and your mobile phone in
the same location such as a pants or
jacket pocket in order to avoid inter-
ference between the two devices.

Keep the smart key away from
electromagnetic materials that
block electromagnetic waves to
the key surface.

Always have the smart key with
you when leaving the vehicle. If
the smart key is left near the vehi-
cle, the vehicle battery may be dis-
charged.

Information

This device complies with Industry
Canada RSS-210 standard.

Operation is subject to the following
three conditions:

1. This device may not cause harmful

interference.

2. This device must accept any inter-

ference received, including interfer-
ence that may cause undesired
operation.

3. Changes or

modifications not

expressly approved by the party
responsible for compliance could
void the user's authority to operate
the device.

Battery replacement 

If the Smart Key is not working prop-
erly, try replacing the battery with a
new one.
Battery Type: CR2032
To replace the battery:
1. Remove the mechanical key.
2. Use a slim tool to pry open the

rear cover of the smart key.

3. Remove the old battery and insert

the new battery. Make sure the
battery position is correct.

4. Reinstall the rear cover of the

smart key.

i

NOTICE

NOTICE

OPD046046

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments