manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 402 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 402

5-101

Dri
ving y

o

ur v

ehicle

5

•

Even if the warning message
does not appear and warning
chime does not sound, always
pay attention to the driving
conditions to prevent danger-
ous situations from occur-
ring.

•

Playing the vehicle audio sys-
tem at high volume may offset
the system warning sounds.

When using the Smart Cruise
Control system:

•

The warning message appears
and warning chime sounds if
the vehicle is unable to maintain
the selected distance from the
vehicle ahead.

•

If the warning message appears
and warning chime sounds,
depress the brake pedal or use
the steering wheel toggle
switch to actively adjust the
vehicle speed, and the distance
to the vehicle ahead.

WARNING  

OOSEV058023N

If the vehicle ahead (vehicle
speed: less than 30 km/h (20
mph)) disappears to the next
lane, the warning chime will
sound and a message "Watch
for surrounding vehicles" will
appear. Adjust your vehicle
speed for vehicles or objects
that can suddenly appear in
front of you by depressing the
brake pedal.
Always pay attention to the road
condition ahead.

CAUTION

OOSEV058051L

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments