manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 465 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 465

7-15

7

Maintenance

C

CL

LIIM

MA

AT

TE

E  C

CO

ON

NT

TR

RO

OL

L  A

AIIR

R  F

FIIL

LT

TE

ER

R

Filter Inspection

The climate control air filter should
be replaced according to the
Maintenance Schedule. If the vehi-
cle is operated in severely air-pollut-
ed cities or on dusty rough roads for
a long period, it should be inspected
more frequently and replaced earlier.
When you replace the climate control
air filter, replace it performing the fol-
lowing procedure, and be careful to
avoid damaging other components.

1. With the glove box open, remove

the stoppers on both sides to allow
the glove box to hang freely on the
hinges.

2. Remove the support rod (1).

OOS077017

OOS077018

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments