manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 231 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 231

3-84

Convenient features of your vehicle

Items

Explanation

Auto Lock

• Disable: The auto door lock operation will be canceled.
• Enable on speed: All doors will be automatically locked when the vehicle speed exceeds 15

km/h (9.3 mph).

• Enable on shift: All doors will be automatically locked if the vehicle is shifted from the P (Park)

position to the R (Reverse), N (Neutral), or D (Drive) position.

Auto Unlock

• Disable : The auto door unlock operation will be canceled.
• Vehicle off : All doors will be automatically unlocked when the POWER button is set to the

OFF position.

• On shift to P : All doors will be automatically unlocked if the gear is shifted to the P (Park)

position.

Two Press Unlock

• Off: The two press unlock function will be deactivated. Therefore, all doors will unlock if the

door unlock button is pressed.

• On: Only the driver's door will unlock if the door unlock button is pressed. When the door

unlock button is pressed again within 4 seconds, the remaining doors will unlock.

3. Door

❈

The information provided may differ depending on which functions are applicable to your vehicle.

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments