Hyundai HX145 LCR, Manual

Page: 582 / 702

8-111
Install cylinder block (4) assembly to the shaft (2).
After fi tting splines of both cylinder block (4) and
shaft (2), assemble them.
After installing the cylinder (4), confi rm whether it
revolves or not by turning using both hands.
Motor is malfunction when it isn’t revolve.
Reassembe the parking brake
G
Install mating plate (16) first and then a friction
plate (15), one by one, into the grooves of the
outer surface of the cylinder block (4).
Immerse the friction plates (15) in a working fl uid
before fi tting them into the grooves.
(9)
Η
ö
Install two O-rings (35, 39) and two back up ring
(47, 48) into O-ring grooves.
Mount a piston (12) in the spindle (101).
G
Apply a thin coat of grease to the O-rings (35, 39).
If the piston (12) does not fi t into the spindle (101)
because of the resistance of the O-ring, tap the
edge of the piston (12) lightly and equally with a
plastic hammer.
Be careful not to damage the O-ring and back up
ring at this time.
Θ
Ι
ö
ö
ö
14098TM42
14098TM43
Λ
ö
ö
ö
14098TM44
REASSEMBLE THE REAR FLANGE (1) PART
Reassemble the check valve
Install O-ring (36, 2EA) on the plug (26, 2EA).
Apply grease to the O-ring (36).
2)
(1)
Η
ö
14098TM45