Hyundai HX145 LCR, Manual

Page: 333 / 702

5-74
User mode switch User mode switch
290F3CD89
(3) (3)
This switch is used to memorize the current machine operating
status in the MCU and activate the memorized user mode.
·
Memory : Push more than 2 seconds.
·
Action : Push within 2 seconds.
·
Cancel : Push this switch once more within 2 seconds.
Refer to the page 5-78 for another set of user mode.
①
②
This switch is used to select the travel speed alternatively.
·
: Low speed
·
: High speed
Do not change the setting of the travel speed switch. Do not change the setting of the travel speed switch.
Machine stability may be adversely affected.
Machine stability may be adversely affected.
Personal injury can result from sudden changes in machine
Personal injury can result from sudden changes in machine
stability.
stability.
Travel speed switch Travel speed switch
①
※
290F3CD91
(4) (4)
This switch is used to activate or cancel the auto idle function.
·
Pilot lamp ON : Auto idle function is activated.
·
Pilot lamp OFF : Auto idle function is cancelled.
The buzzer sounds when the machine has a problem.
In this case, push this switch and buzzer stops, but the warn-
ing lamp blinks until the problem is cleared.
This switch is used to operate the work light.
The pilot lamp is turned ON when operating the switch.
Auto idle/ buzzer stop switch Auto idle/ buzzer stop switch
Work light switch Work light switch
①
②
①
②
(5) (5)
(7) (7)
290F3CD90
290F3CD93
This switch is used to return to the previous menu or parent
menu.
In the operation screen, pushing this switch will display the
view of the camera on the machine (if equipped).
Please refer to page 5-90 for the camera.
If the camera is not installed, this switch is used only ESC
function.
Escape/Camera switch Escape/Camera switch
①
②
③ 290F3CD92
(6) (6)