Hyundai HX145 LCR, Manual

Page: 581 / 702

8-110
Reassembe the cylinder block kit
Install washer (10), spring (14, 9EA), washer (10)
and snap ring (45) in that order, into the cylinder
block (4) inner part.
Put the cylinder block (4) on the pressurize jig.
(7)
Η
Θ
14098TM35
While pressing washer (10) by pressurize jig,
install snap ring (45).
Put a vinyl cover on the sliding surface of the
cylinder block (4) and timing plate (9) for protec-
tion.
Ι
ö
14098TM34
14098TM40
Reassembe the hydraulic motor
Install roller (51, 5EA) to the pin hole of cylinder
block (4).
Install thrust ball (8) to the cylinder block (4).
Insert piston assembly [piston (61) and shoe (62),
9 set] into retainer plate (7).
After mounting, immerse the entire them in a
working fl uid.
(8)
Η
Θ
Ι
ö
Mount the piston assembly (9 set) into the cylin-
der block (4).
The retainer plate (7) must be in contact with
the round part of thrust ball (8).
Κ
ö
14098TM41