Hyundai HX145 LCR, Manual

Page: 572 / 702

8-101
G
Remove the parallel pin (42) from the spindle (101).
Remove the O-ring (126) from the spindle (101).
Do not reuse the O-ring (126).
Disassembling the rear fl ange (1) part
Place the rear fl ange with the contact surface of
the spindle upward.
Remove the timing plate (9) from the rear fl ange
(1).
When removing the timing plate, user can have
diffi culty of the removal due to the close adhesion
of rear fl ange (1) and oil. Remove it after fi tting a
rod through the hole which is used when a casting
is detached.
Be careful of the leakage due to both surface
scratch if using a sharp tool.
G
Remove the paralell pin (41) from the rear fl ange
(1).
(5)
(6)
ö
(7)
Η
Θ
ö
ö
Ι
14098TM08
14098TM09
14098TM11
14098TM10