Hurco AB6, Installation Manual

Page: 162 / 165

Index
Autobend 6 November, 1999 I-3
H
Harness
control console, 2-105
Horizontal adjustment, 1-6
Hydraulic press brake
advance relay, 2-59, 2-77
upper limit switch, 2-59, 2-77
I
IEC power entry plug, 2-112, 2-114
fuse clip, 2-114
voltage selection window, 2-115
voltage selector, 2-114
IN/MM key, 1-21
Incoming power connections, 2-114
Insert key, 1-21
Installation, 1-1
basic steps, 2-12
cable
S6 gauge, 2-108
S7 gauge, 2-108, 2-109
S8 gauge, 2-108 to 2-111
carriage arrestor bars, 2-50
checklist, 2-117
control pendant arm, 2-8, 2-9
mounting plate, 2-9
drill bits, 2-3
gauges, 2-11
magnet, 2-96
mounting variations, 2-2
optional ram control, 2-116
power cabinet, 2-5
mounting position, 2-6
preparation for, 2-1
retract sensor, 2-96
safety decals, 2-4, 2-5
tap sizes, 2-3
tilting gauge bar, 2-47
tools required, 2-1, 2-3
vertical S8 gauges, 2-35
vertical supports, 2-42
Y-shaped rigid gauge bar, 2-45
J
J3 connector, 2-106
J8 connector, 2-59, 2-65, 2-68, 2-70,
2-74, 2-98
Job key, 1-21
Job
most recently operated display, 1-22
number available, 1-22
L
Large power cabinet, 2-76
Leg assembly, adjustable, 2-41
Limit switches, 1-13
LP11 gauge
gauge bar, 2-49
mounting hole dimensions
(hydraulic/mechanical or
upacting press brakes), 2-24
vertical supports, 2-44
LP21 gauge
gauge bar, 2-49
mounting dimensions
(hydraulic/mechanical or
upacting press brakes), 2-28
vertical supports, 2-44
X dimension table
(hydraulic/mechanical press
brake), 2-31
vertical supports, 2-44
LP22 and LP22/54 gauge
X dimension table
(hydraulic/mechanical press
brake), 2-31
LP22 gauge
gauge bar, 2-49
mounting dimensions
(hydraulic/mechanical or
upacting press brakes), 2-28
vertical supports, 2-44
LP22/54 gauge
adjustable leg assembly, 2-41