Autobend 6
November, 1999
3-1
Chapter 3
Maintenance
Maintenance Schedule
For best results in keeping the Autobend in good condition, follow this
maintenance schedule:
Control
1.
Clean the front panel with a mild soap detergent on a weekly
basis; daily if the shop environment is dirty.
2.
Every six months inspect the control harness for possible
cuts in the cable insulation or wires. Replace if damaged.
X-Axis
1.
Wipe down the leadscrew and linear ways with a soft, lint-
free cloth and apply a light film of S.A.E. #10 oil on a
weekly basis. If the shop environment is dirty, clean them
daily.
2.
Every six months inspect belts, couplings, and pulleys for
wear or looseness. Tighten as necessary.
3.
Every six months inspect the gauge harness for possible cuts
in the cable insulation or wires. Replace if damaged.
Summary of Contents for AB6
Page 3: ...iv Revision E Hurco...
Page 5: ...vi Revision E Hurco...
Page 13: ...Installation Manual xiv Revision E Hurco...
