Hurco AB6, Installation Manual

Page: 163 / 165

Installation Manual
I-4 Revision E Hurco
M
Magnet, 2-94, 2-95
Main board, 2-58, 2-65, 2-67, 2-68, 2-70
Maintenance procedures, 2-12
Maintenance schedule, 3-1
control console, 3-1
X-axis, 3-1
Y-axis, 3-2
Minus - key, 1-21
Motor/Tach/Encoder wiring, 2-107
Mounting device
vertical supports, 2-42, 2-45 to 2-47
N
New Bend key, 1-21
Next key, 1-21
Number keys, 1-21
O
Operator, 1-11
appropriate apparel, 1-11
error, 1-3
personal care, 1-11
qualifications, 1-3
training, 1-11
Optional ram control
press brake, 2-116
second axis, 2-116
P
Part bending
safety, 1-14
Parts list, 2-61, 2-71, 2-79, 2-89, 2-93
Pitman assembly, 2-61, 2-79
Plus
+
key, 1-21
Power cabinet, 1-5
mounting position on press brake,
2-6
Power connection, 1-15
Power-up, 1-22
Press brake, 1-5
pwr cabinet mounting position, 2-6
downacting hydraulic
optional ram control, 2-116
Press brake (continued)
electrical connections, 2-96
electro-mechanical failures, 1-15
emergency stop circuits, 1-12
foreseeable misuse, 1-3
hydraulic
advance relay, 2-59, 2-77
Komatsu
optional ram control, 2-116
mechanical
advance switch, 2-59, 2-77
mounting Autobend power cabinet,
2-5
optional ram control, 2-116
positive stop control, 2-116
owner responsibilities, 1-8
retract sensor, 2-94
unattended operation, 1-14
upacting
advance switch, 2-59, 2-77
optional ram control, 2-116
R
Ram
block for shut-down, 1-23
control, 2-93
stroke, 2-61, 2-71, 2-79, 2-89
Ram On key, 1-21
Ram up circuits, 2-72, 2-90
Referencing
gauge bar, 2-56
gauging surface, 2-55
zero reference bars, 2-55
Relay board, 2-76, 2-83, 2-85 to 2-88,
2-90, 2-91, 2-99
Relay connections, 2-72
Relay socket press connections diagram,
2-75
Retract cable, 2-97
Retract sensor, 2-93 to 2-95
ram control, 2-93
Rotating shaft, 2-61, 2-79
Run key, 1-14