Hurco AB6, Installation Manual

Page: 161 / 165

Installation Manual
I-2 Revision E Hurco
E
Electrical
grounding point, 1-17, 2-63, 2-66,
2-81, 2-84, 2-96, 2-103
printed circuit boards, 1-17
static, 1-17
systems, 1-15
Electrical connections, 1-2, 2-58
9-pin connectors, 2-108 to 2-111
AB6 power cabinet, 2-112
AWG wire, 2-112
cable runs, 2-5
control console
cable, 2-105
harness, 2-105
control pendant arm, 2-105
external power source, 2-112
gauge cable, 2-107
gauge harness, 2-107
IEC power entry plug, 2-112, 2-114
incoming power connections, 2-114
J3 connector, 2-106
J8, 2-59, 2-65, 2-68, 2-70, 2-74, 2-98
main bd, 2-58, 2-65, 2-67, 2-68, 2-70
motor/tach/encoder wiring, 2-107
pwr cabinet, 2-58, 2-60, 2-76,
2-78, 2-107
press brake, 2-59, 2-77, 2-96
relay board, 2-76, 2-83, 2-85 to 2-88,
2-90, 2-91, 2-99
system component part, 2-104
TB14, 2-77, 2-83, 2-86, 2-88, 2-91,
2-99
Electrical schematics
solenoid, 2-72, 2-90
up relay, 2-72, 2-90
Emergency situation
Stop key, 1-4
Emergency Stop button, 1-14
Emergency stop circuits, 1-12
Enter key, 1-21
External power source, 2-112
F
Fire hazards, 1-18
Fixturing, 1-13
safety, 1-13
Flip fingers, 1-12, 2-45, 2-54
Foot treadle, 2-62, 2-80
Foreseeable misuse, 1-3
from operator error, 1-3
machine modification, 1-8
tampering with safety devices, 1-9
unattended operation, 1-14
Funct key, 1-21
Fuse clip, 2-114
G
Gauge
attaching to press brake, 2-38
blocks, 2-54
mounting plate, 2-14
Gauge bar
length, 1-6
LP11, 2-45, 2-49
LP21, 2-45
LP22, 2-45, 2-49
referencing, 2-56
tilting, 2-45, 2-47
Y-shaped rigid, 2-45
Gauge cable, 2-36, 2-107
installation, 2-108 to 2-111
Gauge harness, 2-36, 2-107
installation, 2-108 to 2-111
Gauge height, 2-17
Gauge mounting, 2-16
Gauges, types, 1-6, 2-11
Gauging surface
flip fingers, 2-54
gauge blocks, 2-54
referencing, 2-55
selecting, 2-53
zero reference bars, 2-55
Ground wire, 2-108 to 2-111
Guifil upacting press brake
speed change switch, 2-69, 2-87
wiring diagram, 2-69, 2-87