manualshive.com logo in svg

Huawei 3900 Series, Commissioning Manual

Introducing the Huawei 3900 Series - a cutting-edge solution for all your technological needs. This exceptional product offers unparalleled performance and functionality. Enhance your experience with our easy-to-use Solution Manual, available for free download at manualshive.com. Discover the limitless possibilities of the Huawei 3900 Series today!

Share
Download
background image

No
.

Procedu
re

Description

Standards for Continuing the
Commissioning

3

Automati
cally
upgrade
the
software

The M2000 automatically checks
whether the target GBTS version
and the current GBTS version are
consistent according to the target
version information provided in the
deployment list.

l

If the versions are consistent, the
GBTS software need not be
upgraded.

l

If the versions are inconsistent,
the M2000 instructs the GBSC to
start upgrading the GBTS
software. The GBTS downloads
the target version from the
M2000 and upgrades the
software.
The parameters for upgrading
the GBTS software are as
follows:

–

Load mode: Load by
Configuration and Abis Quick
Load(No Service).

–

Automatically Load and
Activate Switch: Determined
by the 

vercfg.xml

 file in the

software package.

NOTE

The upgrade of the GBTS
configuration data is not controlled by
the M2000. After the GBTS software
is upgraded and the GBTS is reset, the
GBTS automatically sends a request to
the GBSC for loading configuration
data.

You can set the M2000 to skip the
software upgrade when starting the
commissioning task.

l

If the software need not be
upgraded or is already upgraded
successfully, the M2000
automatically proceeds with the
next procedure.

l

If the software fails to be
upgraded, the commissioning
automatically stops and switches
to the 

Abnormal

 status.

5 Commissioning the MBTS in GL or UL Mode on the
M2000

3900 Series Multi-Mode Base Station

Commissioning Guide

5-20

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2010-07-30)

Summary of Contents for 3900 Series





































































































































































































Reviews:

No comments

Related manuals for 3900 Series

Canon imagePROGRAF iPF830 Setup Manual preview
imagePROGRAF iPF830
Brand: Canon Pages: 16
Canon i950 Series Installation Instruction preview
i950 Series
Brand: Canon Pages: 6
GE 28310 Setup Manual preview
28310
Brand: GE Pages: 2
Walimex Pro 12493 Manual preview
12493
Brand: Walimex Pro Pages: 4
Daikin DWSC - Vintage C Installation, Operation And Maintenance Manual preview
DWSC - Vintage C
Brand: Daikin Pages: 57
Yolin YL80C Manual preview
YL80C
Brand: Yolin Pages: 25
EAL Formula 523585 Assembly Instructions preview
Formula 523585
Brand: EAL Pages: 4
LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
Valor Legend G3 Installation Instructions Manual preview
Legend G3
Brand: Valor Pages: 6
Valor L1 Series Nstallation Instructions preview
L1 Series
Brand: Valor Pages: 6
Valor Portrait Series Installation Instructions Manual preview
Portrait Series
Brand: Valor Pages: 6
Valor L1 Series Installation Instructions Manual preview
L1 Series
Brand: Valor Pages: 10
Essence Smartcare Care@Home MDsense Getting Started preview
Care@Home MDsense
Brand: Essence Smartcare Pages: 12
Victory 4x4 5TH GEN 4RUNNER Install Instructions preview
5TH GEN 4RUNNER
Brand: Victory 4x4 Pages: 5
Keith WALKING FLOOR Helpful Hints preview
WALKING FLOOR
Brand: Keith Pages: 2
Toro 140-1914 Installation Instructions Manual preview
140-1914
Brand: Toro Pages: 8
turck FTCI Series Operating Instructions Manual preview
FTCI Series
Brand: turck Pages: 12

Brands by name

Popular brands

Load more brands