manualshive.com logo in svg

Huawei 3900 Series, Commissioning Manual

Introducing the Huawei 3900 Series - a cutting-edge solution for all your technological needs. This exceptional product offers unparalleled performance and functionality. Enhance your experience with our easy-to-use Solution Manual, available for free download at manualshive.com. Discover the limitless possibilities of the Huawei 3900 Series today!

Share
Download
background image

5.1 Procedure for MBTS Commissioning in GL or UL Mode
on the M2000

You can commission a base station in GL or UL mode on the M2000 in a central equipment
room, including upgrading software and configuring data, monitoring alarms, and obtaining the
commissioning report.

Prerequisite

Before you commission the MBTS, the MBTS, RNC, and M2000 must meet following
requirements:

l

The MBTS hardware such as the cabinets, cables, antenna system, and auxiliary devices,
is installed and passes the installation check. The MBTS is powered on and passes the
power-on check.

l

The controller hardware is installed and commissioned, and the system works properly.
The negotiation data of the MBTS to be commissioned is configured and recorded.

l

The M2000 is commissioned, it is connected to the corresponding controller, and the
configuration synchronization is completed.

In addition, the following requirements should be met:

l

Check that the network is normal.

l

The data configuration file and target version software package that map the mode of the
base station to be commissioned are ready. If a GBTS is to be commissioned, the data
configuration file and target version software package must be uploaded to the BSC.

l

The GBTS is activated using the 

ACT BTS

 command if one mode of an MBTS is GBTS.

Commissioning Flowchart

Figure 5-1

 shows the procedure for remotely commissioning an MBTS in GL or UL mode on

the M2000.

3900 Series Multi-Mode Base Station
Commissioning Guide

5 Commissioning the MBTS in GL or UL Mode on the

M2000

Issue 02 (2010-07-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

5-3

Summary of Contents for 3900 Series





































































































































































































Reviews:

No comments

Related manuals for 3900 Series

Calsense ET2000 Setup Instructions preview
ET2000
Brand: Calsense Pages: 6
Magellan CYCLO 315 Series User Manual preview
CYCLO 315 Series
Brand: Magellan Pages: 39
MadStad Engineering MadStad Installation Instruction preview
MadStad
Brand: MadStad Engineering Pages: 2
Sierra Monitor Corporation 5398-21 Specification Sheet preview
5398-21
Brand: Sierra Monitor Corporation Pages: 1
BAFANG DP C15.CAN User Manual preview
DP C15.CAN
Brand: BAFANG Pages: 12
Trailboss HD86 Fitting Instructions preview
HD86
Brand: Trailboss Pages: 5
ADT Pulse DBC835 Quick Installation Manual preview
Pulse DBC835
Brand: ADT Pages: 22
CS Instruments VA 500 Instruction Manual preview
VA 500
Brand: CS Instruments Pages: 52
Goobay Laserpointer 3 in 1 Manual preview
Laserpointer 3 in 1
Brand: Goobay Pages: 14
Soluna S4 EU-A36 User Manual preview
S4 EU-A36
Brand: Soluna Pages: 52
F&F DRM-01 24 V Instructions Manual preview
DRM-01 24 V
Brand: F&F Pages: 8
Freefly HY-12S16 User Manual preview
HY-12S16
Brand: Freefly Pages: 8
Baker Hughes Flame Tracker Lite Operation And Maintenance Manual preview
Flame Tracker Lite
Brand: Baker Hughes Pages: 14
VSO TECHNOLOGY JK-766MG24 User Manual preview
JK-766MG24
Brand: VSO TECHNOLOGY Pages: 4
HomeMatic HmIP-STHO Installation And Brief Instructions preview
HmIP-STHO
Brand: HomeMatic Pages: 2
Kymera Body Board User Manual preview
Body Board
Brand: Kymera Pages: 28
Audio System MOSCONI AS LED FRAMES Owner'S Manual preview
MOSCONI AS LED FRAMES
Brand: Audio System Pages: 2
Tapco Side-Winder Operating Instructions preview
Side-Winder
Brand: Tapco Pages: 2

Brands by name

Popular brands

Load more brands