manualshive.com logo in svg

Huawei 3900 Series, Commissioning Manual

Introducing the Huawei 3900 Series - a cutting-edge solution for all your technological needs. This exceptional product offers unparalleled performance and functionality. Enhance your experience with our easy-to-use Solution Manual, available for free download at manualshive.com. Discover the limitless possibilities of the Huawei 3900 Series today!

Share
Download
background image

4.6.2 Handling MBTS Alarms

This section describes how to handle MBTS alarms. After the automatic software commissioning
starts, you can use the M2000 to monitor the alarms of an MBTS and the relevant alarms of the
controller that manages the MBTS in real time. If exceptions occur during the commissioning,
you can view the alarm information to locate and handle faults in time.

Prerequisite

The automatic software commissioning already starts, and you have not confirmed the
completion of the commissioning yet.

Context

M2000displays all the alarms reported during the MBTS commissioning based on object types.

l

The alarms of GBTSs are categorized as the following types: E1T1 alarms, IP alarms,
software alarms, board alarms, antenna alarms, cell service alarms, and other alarms. Other
alarms refer to the alarms that cannot be categorized on the basis of specific objects.

l

The alarms of NodeBs are categorized as the following types: E1T1 alarms, IP alarms,
antenna alarms, board alarms, cell alarms, external alarms, and other alarms. Other alarms
refer to the alarms that cannot be categorized on the basis of specific objects.

Procedure

Step 1

Choose 

Configuration

 > 

Auto Deployment

 > 

MBTS Auto Deployment

. The 

MBTS Auto

Deployment

 window is displayed.

Step 2

From 

MBTS List

, select an MBTS whose alarms you need to view, and then click 

 on the

toolbar. The alarm monitoring window is displayed.

For details about the alarm monitoring window, see 

Interface Description: MBTS

Commissioning

.

Step 3

Select the object to be viewed in the left pane of the alarm monitoring window, and then view
the alarm information about this object in the corresponding area in the right pane.

NOTE

l

If you select an MBTS to view its alarms, you can view the alarms of both the GBTS and the NodeB.
If one base station is normal and only the other base station is deployed, the deployed base station
provides the entries of alarm classification and fault diagnosis, whereas the normal base station displays
all the alarms without providing the entries.

l

You can also choose to view the alarm information about only the GBTS or the NodeB. In the 

GBTS

List

 or 

NodeB List

 area of the 

MBTS Auto Deployment

 window, right-click a record, and then choose

Open Monitor Window

 from the shortcut menu. The alarm monitoring window of the GBTS or NodeB

is displayed.

Step 4

Handle MBTS alarms.
1.

Double-click an alarm to be handled, and then click the link provided in 

Reason

 in the

displayed dialog box of details.

2.

Rectify the alarm according to the alarm handling suggestions.

----End

4 Commissioning the MBTS in GU Mode on the M2000

3900 Series Multi-Mode Base Station

Commissioning Guide

4-18

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2010-07-30)

Summary of Contents for 3900 Series





































































































































































































Reviews:

No comments

Related manuals for 3900 Series

Gates POVCAM AG-HCK10G Using preview
POVCAM AG-HCK10G
Brand: Gates Pages: 2
Tait TB8000 Installation And Operation Manual preview
TB8000
Brand: Tait Pages: 46
Tait TB8100 Technical Support preview
TB8100
Brand: Tait Pages: 9
Tait TB7300 Installation And Operation Manual preview
TB7300
Brand: Tait Pages: 89
Tait TB7100 Fitting Instruction preview
TB7100
Brand: Tait Pages: 20
Vello CB-300 Manual preview
CB-300
Brand: Vello Pages: 8
Waterpik WF-05 Instruction Manual preview
WF-05
Brand: Waterpik Pages: 20
Waterpik Water Flosser WF-06 Quick Start Manual preview
Water Flosser WF-06
Brand: Waterpik Pages: 2
Waterpik WP-100 Series Care Instructions preview
WP-100 Series
Brand: Waterpik Pages: 6
Waterpik WP-250 Instruction Manual preview
WP-250
Brand: Waterpik Pages: 24
NEEWER X1 Pro Instruction Manual preview
X1 Pro
Brand: NEEWER Pages: 58
OEM Audio Reference Series Manual preview
Reference Series
Brand: OEM Audio Pages: 29
XCM Xbox 360 Quick Manual preview
Xbox 360
Brand: XCM Pages: 11
BabySense Dreamer Manual preview
Dreamer
Brand: BabySense Pages: 76
Honda HRM3000 User Manual preview
HRM3000
Brand: Honda Pages: 73
Bison BA834 Instruction Manual preview
BA834
Brand: Bison Pages: 3
Thule 1308 Instructions Manual preview
1308
Brand: Thule Pages: 8
M-E BELL SYSTEM FG-16 V3 Short Instruction Manual preview
BELL SYSTEM FG-16 V3
Brand: M-E Pages: 2

Brands by name

Popular brands

Load more brands