manualshive.com logo in svg

Huawei 3900 Series, Commissioning Manual

Introducing the Huawei 3900 Series - a cutting-edge solution for all your technological needs. This exceptional product offers unparalleled performance and functionality. Enhance your experience with our easy-to-use Solution Manual, available for free download at manualshive.com. Discover the limitless possibilities of the Huawei 3900 Series today!

Share
Download
background image

and rectify faults (if any). For details, see 

5.3 Intervening the GBTS

Transmission

.

5.

The M2000 automatically commissions the MBTS. For details, see 

5.4

Commissioning the MBTS on the M2000

. During the process of the MBTS

commissioning, monitor the commissioning progress and alarms, and rectify faults (if
any). The monitoring operations vary according to modes. for details on the operations
in each mode, see 

5.5 Monitoring the GBTS Commissioning Task

, 

5.6 Monitoring

the NodeB Commissioning Task

, and 

5.7 Monitoring the eNodeB Commissioning

Task

.

6.

Obtain the commissioning report from the M2000. For details, see 

5.8 Obtaining the

Commissioning Report

.

7.

View the commissioning report to check the MBTS operating status. For details, see

5.9 Checking the Operating Status of the Base Station

.

8.

Verify eNodeB services. For details, see 

5.10 Testing the Basic Services of the

eNodeB

.

9.

Confirm the MBTS commissioning task. For details, see 

5.11 Confirming the

Commissioning Task

.

----End

6.2 Preparing the USB Disk for Local Commissioning

The USB disk should be ready before it is used for local commissioning. The preparation of the
USB disk for local commissioning varies according to the base station mode. Therefore, you
must prepare the USB disk based on the mode of the base station to be commissioned.

Context

NOTE

Files required for both modes must be saved to the USB disk when base stations supporting two modes are
deployed.

6.2.1 Arranging the USB Disk for Local GBTS Commissioning

The USB disk should be ready before it is used for local GBTS commissioning.

6.2.2 Arranging the USB Disk for Local NodeB Commissioning

The USB disk should be ready before it is used for local NodeB commissioning.

6.2.3 Arranging the USB Disk for Local eNodeB Commissioning

Before the local eNodeB commissioning through the USB storage device, you need to save the
required files in a specified directory in the USB storage device.

6.2.4 Configuring the Security Equipment

When the security gateway (GW) is deployed in the network, you need to configure data for the
security GW. In the case that the IEEE 802.1x authentication is adopted, the authentication access
equipment and the authentication server should be configured. Generally, an authentication
server is the Authentication, Authorization and Accounting (AAA) server.

6.2.1 Arranging the USB Disk for Local GBTS Commissioning

The USB disk should be ready before it is used for local GBTS commissioning.

3900 Series Multi-Mode Base Station
Commissioning Guide

6 Commissioning the MBTS by Using USB and M2000

Issue 02 (2010-07-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

6-5

Summary of Contents for 3900 Series





































































































































































































Reviews:

No comments

Related manuals for 3900 Series

KC HiLiTES C Series Wiring Diagram preview
C Series
Brand: KC HiLiTES Pages: 4
Manfrotto 115 Instructions preview
115
Brand: Manfrotto Pages: 2
Manfrotto 143 Instructions For Use preview
143
Brand: Manfrotto Pages: 2
4B M100 Operation Manual preview
M100
Brand: 4B Pages: 12
Panasonic KX-FLM551 Schematic Diagrams preview
KX-FLM551
Brand: Panasonic Pages: 2
Xenith X1 Player'S Manual preview
X1
Brand: Xenith Pages: 17
B-TEK Scales T403S Install And Configure preview
T403S
Brand: B-TEK Scales Pages: 3
B-Speech B-Speech Prim Manual preview
B-Speech Prim
Brand: B-Speech Pages: 18
B-PWR PAFB-1C Instruction Manual preview
PAFB-1C
Brand: B-PWR Pages: 12
Dacor EF36LNFSS Installation Instructions preview
EF36LNFSS
Brand: Dacor Pages: 4
Sunx NA2-N Series Instruction Manual preview
NA2-N Series
Brand: Sunx Pages: 2
IDS NXT Operation preview
NXT
Brand: IDS Pages: 22
Safemate A905 Manual preview
A905
Brand: Safemate Pages: 12
La Crosse Technology TX13U Instruction Manual preview
TX13U
Brand: La Crosse Technology Pages: 2
walimex Fresnel Instruction Manual preview
Fresnel
Brand: walimex Pages: 6
walimex 16280 Instruction Manual preview
16280
Brand: walimex Pages: 10
SRC S-VS-09-01-AL Quick Start Manual preview
S-VS-09-01-AL
Brand: SRC Pages: 5
Cargo Floor CF500 SL-2 Replacement Instructions Manual preview
CF500 SL-2
Brand: Cargo Floor Pages: 16

Brands by name

Popular brands

Load more brands