manualshive.com logo in svg

Huawei 3900 Series, Commissioning Manual

Introducing the Huawei 3900 Series - a cutting-edge solution for all your technological needs. This exceptional product offers unparalleled performance and functionality. Enhance your experience with our easy-to-use Solution Manual, available for free download at manualshive.com. Discover the limitless possibilities of the Huawei 3900 Series today!

Share
Download
background image

Expectation

Connection success rate > 95%. The calls are uninterrupted and none
of the calls get dropped till they are released. The voice is clear with
no loud noise.

 

----End

5.11 Confirming the Commissioning Task

After the M2000 finishes commissioning a base station automatically, the commissioning task
enters the to-be-confirmed state, waiting for manual confirmation that the commissioning is
complete.

5.11.1 Confirming a GBTS Commissioning Task

This section describes how to confirm the completion of GBTS commissioning. After the GBTS
service verification is complete, the commissioning task switches to 

Confirming completed

status, and you need to manually confirm the completion.

5.11.2 Confirming a NodeB Commissioning Task

This section describes how to confirm a NodeB commissioning task. After a NodeB passes the
service verification, the status of the NodeB commissioning task changes to 

Waiting for

Acknowledgement

. You need to manually confirm that the commissioning is complete.

5.11.3 Confirming an eNodeB Commissioning Task

After the eNodeB health check is complete, the status of the commissioning task changes to

Awaiting_ack

. In this case, you need to acknowledge the eNodeB commissioning.

5.11.1 Confirming a GBTS Commissioning Task

This section describes how to confirm the completion of GBTS commissioning. After the GBTS
service verification is complete, the commissioning task switches to 

Confirming completed

status, and you need to manually confirm the completion.

Context

If some alarms are still not cleared during the commissioning, it is recommended that you not
confirm the completion of the commissioning task so that you can view and handle these alarms
easily. After you confirm the completion, all GBTS alarms, which are generated during the
commissioning, cannot be viewed on the monitoring tab page on the basis of a single GBTS.
The alarms that are not cleared during the commissioning are reported again as common alarms.

Procedure

Step 1

Choose 

Configuration

 > 

Auto Deployment

 > 

GBTS Auto Deployment

 to open the 

GBTS

Auto Deployment

 window.

Step 2

In the commissioning task list, select the commissioning task to be confirmed.

Step 3

Click 

 on the toolbar to confirm the completion of the commissioning task.

After the commissioning is complete, the M2000 performs the following operations:

l

Stop monitoring the alarms of the GBTS and the GBSC managing the GBTS.

5 Commissioning the MBTS in GL or UL Mode on the
M2000

3900 Series Multi-Mode Base Station

Commissioning Guide

5-42

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2010-07-30)

Summary of Contents for 3900 Series





































































































































































































Reviews:

No comments

Related manuals for 3900 Series

omnicharge Omni 20 User Manual preview
Omni 20
Brand: omnicharge Pages: 12
omnicharge Omni 20 Quick Start Manual preview
Omni 20
Brand: omnicharge Pages: 72
Baintech PowerTop User'S Operation Manual preview
PowerTop
Brand: Baintech Pages: 7
Baicheng Innovations PLUTO User Manual preview
PLUTO
Brand: Baicheng Innovations Pages: 32
cam HS Series Operating Manual preview
HS Series
Brand: cam Pages: 28
FeiYu Tech WG2 Instruction Manual preview
WG2
Brand: FeiYu Tech Pages: 14
laerdal Resusci Baby QCPR Installation Manual preview
Resusci Baby QCPR
Brand: laerdal Pages: 8
UniFlow microMIND V2 Installation & Configuration Manual preview
microMIND V2
Brand: UniFlow Pages: 42
Valcom V-1109RTVA Brochure preview
V-1109RTVA
Brand: Valcom Pages: 1
Valcom V-1109RTHF User Manual preview
V-1109RTHF
Brand: Valcom Pages: 13
Valcom VIP-822 Manual preview
VIP-822
Brand: Valcom Pages: 3
Valcom VIP-814 User Manual preview
VIP-814
Brand: Valcom Pages: 4
Safe Fleet PRIME DESIGN VRI3-E-PM11 Manual preview
PRIME DESIGN VRI3-E-PM11
Brand: Safe Fleet Pages: 12
Baumer OADM 21I6480/S14F Manual preview
OADM 21I6480/S14F
Brand: Baumer Pages: 4
Amphenol Telaire Ventostat T8100 NS Series User Instructions preview
Telaire Ventostat T8100 NS Series
Brand: Amphenol Pages: 4
Heitronic Christmasstar Installation And Operating Instructions preview
Christmasstar
Brand: Heitronic Pages: 4
Phonocar 4/084 Mounting Instructions preview
4/084
Brand: Phonocar Pages: 2
SIXTOL Palm SX4056 Instructions For Use Manual preview
Palm SX4056
Brand: SIXTOL Pages: 48

Brands by name

Popular brands

Load more brands