manualshive.com logo in svg

Huawei 3900 Series, Commissioning Manual

Introducing the Huawei 3900 Series - a cutting-edge solution for all your technological needs. This exceptional product offers unparalleled performance and functionality. Enhance your experience with our easy-to-use Solution Manual, available for free download at manualshive.com. Discover the limitless possibilities of the Huawei 3900 Series today!

Share
Download
background image

4.6.2 Handling MBTS Alarms

This section describes how to handle MBTS alarms. After the automatic software commissioning
starts, you can use the M2000 to monitor the alarms of an MBTS and the relevant alarms of the
controller that manages the MBTS in real time. If exceptions occur during the commissioning,
you can view the alarm information to locate and handle faults in time.

4.6.3 Diagnosing MBTS Faults

In the case of GBTS/NodeB board alarms, GBTS/NodeB E1T1 alarms, and GBTS/NodeB
antenna alarms, if the causes of the fault cannot be located in the alarm information, you can
perform fault diagnosis and then take corresponding measures to handle the alarms.

4.6.4 Viewing the Service Verification Results of an MBTS

This section describes how to view the service verification results of an MBTS. After the
automatic service verification starts, the M2000 automatically collects the performance data
related to the GBTS and NodeB services and checks whether the services are normal.

4.6.5 Restarting/Deleting MBTS Commissioning Tasks

This section describes how to restart or delete ongoing MBTS commissioning tasks.

4.6.1 Viewing the Progress and Status of an MBTS Commissioning
Task

This section describes how to view the progress and status of an automatic MBTS commissioning
task that is being performed by the M2000.

Prerequisite

The automatic software commissioning already starts.

Context

User 

admin

 can view commissioning tasks created by any user, whereas other users can view

only the commissioning tasks created by themselves.

Procedure

Step 1

Choose 

Configuration

 > 

Auto Deployment

 > 

MBTS Auto Deployment

. The 

MBTS Auto

Deployment

 window is displayed.

Step 2

View the status and progress of an MBTS commissioning task.

Option

Description

Deploying a GBTS and a
NodeB at the same time

View the commissioning progress and status of the GBTS and
that of the NodeB in the 

GBTS List

 and 

NodeB List

 areas.

Deploying a NodeB when
the GBTS is normal

View the commissioning progress and status of the NodeB in the

NodeB List

 area.

Deploying a GBTS when
the NodeB is normal

View the commissioning progress and status of the GBTS in the

GBTS List

 area.

4 Commissioning the MBTS in GU Mode on the M2000

3900 Series Multi-Mode Base Station

Commissioning Guide

4-16

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2010-07-30)

Summary of Contents for 3900 Series





































































































































































































Reviews:

No comments

Related manuals for 3900 Series

Panasonic KX-TD1232NE User Manual preview
KX-TD1232NE
Brand: Panasonic Pages: 252
Gates POVCAM AG-HCK10G Using preview
POVCAM AG-HCK10G
Brand: Gates Pages: 2
Panasonic NNC994S - Genius Prestige - Convection Microwave... Installation Instructions preview
NNC994S - Genius Prestige - Convection Microwave...
Brand: Panasonic Pages: 1
LINHOF SUPER ROLLEX Operating Instruction preview
SUPER ROLLEX
Brand: LINHOF Pages: 5
Levana OmaSense Quick Start Manual preview
OmaSense
Brand: Levana Pages: 14
Herrnhuter A1e Assembly Instructions preview
A1e
Brand: Herrnhuter Pages: 2
Tessera4x4 SOT-1311 ROLL Installation Manual preview
SOT-1311 ROLL
Brand: Tessera4x4 Pages: 20
DrBrowns Nipples Quick Start Manual preview
Nipples
Brand: DrBrowns Pages: 2
ESAB Sentinel A50 Instructions For Use Manual preview
Sentinel A50
Brand: ESAB Pages: 12
Orno OR-CR-233 Operating Manual preview
OR-CR-233
Brand: Orno Pages: 4
M-Audio Monitor _QSG_DE01 (German) Quick Start Anleitung preview
Monitor _QSG_DE01
Brand: M-Audio Pages: 6
Veko MDO-O Installation And User Manual preview
MDO-O
Brand: Veko Pages: 2
N-Com SPCOM00000091 Quick Start Manual preview
SPCOM00000091
Brand: N-Com Pages: 6
Optex Pro Swing OA-Edge T Original Instructions preview
Pro Swing OA-Edge T
Brand: Optex Pages: 2
Gordon AirPlay AirRing Large Owner'S Manual preview
AirRing Large
Brand: Gordon AirPlay Pages: 7
Thule CIRCUIT 526XT Manual preview
CIRCUIT 526XT
Brand: Thule Pages: 12
Sacred Sun sp series Technical Manual preview
sp series
Brand: Sacred Sun Pages: 27
CICLOSPORT Ciclo navic 50 Instruction Manual preview
Ciclo navic 50
Brand: CICLOSPORT Pages: 25

Brands by name

Popular brands

Load more brands