Huawei 3900 Series Page 88 Commissioning Manual Download | Manualshive

Page: 88 / 196

background image

Step 2

On the

GBTS List

tab page, select one or multiple commissioning tasks, and then click

.

Alternatively, right-click the tasks, and then choose

Restart

from the shortcut menu.

----End

5.6 Monitoring the NodeB Commissioning Task

This chapter describes how to monitor a NodeB commissioning task. By monitoring the NodeB
commissioning task, you can learn the commissioning progress and status, and then rectify
commissioning faults (if any) in time.

5.6.1 Viewing the NodeB Commissioning Progress

You can view the stage and progress of a NodeB commissioning task.

5.6.2 Viewing NodeB Alarms

After the NodeB software is upgraded automatically during the NodeB commissioning, you can
view the alarms of this NodeB and the relevant alarms of the RNC managing this NodeB through
the M2000. All the alarms related to the NodeB are categorized according to objects. This helps
you query required alarms. In addition, the M2000 provides the function of automatically
diagnosing NodeB board alarms, NodeB antenna alarms, and E1T1 alarms. You can take
corresponding measures to rectify the faults based on the diagnosis results.

5.6.3 Viewing Service Verification Results

After a NodeB commissioning task is at the service verification stage, the M2000 automatically
subscribes to the performance counters of the logical cells of this NodeB and checks whether
the NodeB services are normal based on the counter values. At this stage, you can check whether
each cell of the NodeB has passed the service verification and view the accumulated value of
each counter.

5.6.4 Performing a NodeB Task Again or Deleting the Task

When a NodeB commissioning task is running, you can perform this task again or delete this
task.

5.6.1 Viewing the NodeB Commissioning Progress

You can view the stage and progress of a NodeB commissioning task.

Prerequisite

The NodeB deployment list is imported successfully.

Procedure

Step 1

Choose

Configuration

>

Auto Deployment

>

NodeB Auto Deployment

. The

NodeB Auto

Deployment

window is displayed.

Step 2

In the commissioning task list, view the status and progress of a commissioning task.

The commissioning task status is displayed in

Status

. The current task execution progress is

displayed in

Current Phase

. The specific stage information about the task in each status is

displayed in

Description

. For example, when a commissioning task is in the

state (that is,

the commissioning is being performed), the operations such as version download, software
upgrade, and configuration file upgrade are performed.

5 Commissioning the MBTS in GL or UL Mode on the
M2000

3900 Series Multi-Mode Base Station

Commissioning Guide

5-28

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2010-07-30)

«
...
86
87
88
89
90
...
»

Summary of Contents for 3900 Series





































































































































































































Reviews:

No comments

Related manuals for 3900 Series

Super G3 FAX Board-T1

Brand: Canon Pages: 16

iP4000 - PIXMA Photo Printer

Brand: Canon Pages: 3

Brand: Canon Pages: 21

Brand: Canon Pages: 6

7215 - LV XGA LCD Projector

Brand: Canon Pages: 8

Brand: D-Link Pages: 36

Brand: Baltimore Aircoil Company Pages: 12

Brand: Hama Pages: 10

Brand: Hama Pages: 6

Brand: Uclear Pages: 2

Brand: Unimig Pages: 16

Brand: VARIZOOM Pages: 5

Brand: VARIZOOM Pages: 5

Brand: Zhiyun Pages: 10

Brand: HBX Pages: 12

Brand: Raw Thrills Pages: 49

Brand: Ikelite Pages: 28

Brand: Baumer Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands