Gx
Series
EN - 63
4. The
symbol indicates the correct connection and
recognition of the IMP57 by the instrument. Check the
green STATUS LED lighting on the IMP57.
The value of the voltage between the measurement
points is shown in the upper part of the display.
Press the
GO/STOP
key
for few seconds
on the
instrument to start the test. The following screen is
shown on the display (in case of L-L measurement in
STD mode)
5. The standard (STD) short-circuit current is shown in the
upper part of the display.
The P-P Loop impedance values, in addition to its
resistive and reactive components, are shown in the
central part of the display, expressed in
m
.
Press the
SAVE
button or touch the
icon to save
the measurement (see § 7.1).
