Gx
Series
EN - 11
Reference country
5.1.2.
Touch the icon
to select the reference country. This
choice have influence on the LOOP, NoTrip and EARTH
measurements. The screen to the side appears on the
display. Select the desired country, confirm the choice and
return to the previous screen.
NOTE
: in the EUR, UK no USA, GER, AUS/NZ and NOR
countries the guide user interface and the result of the
LOOP/
and
NoTrip
tests can be modified
Automatic Power OFF for display and key sound
5.1.3.
Touch the
icon. The screen to the side appears on the
display.
Move the slide bar reference of section "
" down/up to
turn off/on the Automatic Power OFF of the instrument after
a period of inactivity of 5 minutes.
Move the slide bar reference of section "
" down/up to
disable/enable the sound key when pressed. Confirm the
choices made and go back to the previous screen.
System
5.1.4.
Touch the icon
to select the type of electrical system
(TT, TN or IT), of the mains frequency (50Hz, 60Hz), of the
limit value for contact voltage (25V, 50V) and rated voltage
value to be used for calculating the assumed short-circuit
current (see §). The screen to the side appears on the
display.
NOTE: for “USA” country this icon is not
displayed and the electrical system is fixed to TN
Move the slide bar references to select the options. Confirm
the choices made and go back to the previous screen.
Operator name entry
5.1.5.
Touch the icon
to enter the name of the operator that
will be displayed in the header of each measurement
downloaded to PC. The screen to the side appears on the
display.
Set the desired name using the virtual keyboard (max 12
characters).
Confirm the settings or exit without saving.