HRC NSF250R 2012, Owner'S Manual & Parts List

Page: 54 / 300

3-14
Service and Maintenance
(1) INNER PIPE (2) OUTER BODY
(3) GLASS WOOL (4) FRONT OUTER
(5) WASHER (6) RIVET
3. Remove the glass wool.
Install the new glass wool onto the inner pipe.
4. Apply sealant (HSSK-316C) to the mating surface
between the front outer and outer body, then
install the glass wool/inner pipe/front outer
assembly into the outer body.
(1) RIVET
5. Drive 7 stainless pop rivets (4.8 mm) through the
holes in the outer body after applying epoxy
based adhesive.
(1) RIVET
Glass Wool Replacement
The silencer consists of an inner pipe, outer body,
noise-absorbing glass wool, front outer, rear outer
and exhaust pipe.
To replace the glass wool:
1. Drill off the heads of 8 rivets at the front end of the
front outer. Press the rivets down into the casing
using a 5 mm pin or rod.
2. Remove the outer body from the front outer.
(4)
(3)
(1)
(2)
(6)
(5)
(1)
(1)
(1)
(1)