HRC NSF250R 2012, Owner'S Manual & Parts List

Page: 50 / 300

3-10
Service and Maintenance
(1) OIL FILLER CAP (2) DRAIN PLUG
Transmission Oil
Oil Change
Change the transmission oil with the engine warm.
Support the machine upright to assure complete
and rapid draining.
1. Cut and remove the lock wire from the oil drain
plug and filler cap.
2. Remove the oil filler cap.
(1) DRAIN PLUG
3. Place an oil drain pan under the engine and
remove the drain plug.
4. After the oil has completely drained, make sure
that the sealing washer is in good condition and
reinstall the drain bolts. Tighten the drain bolt to
the specified torque.
Torque: 16 N•m (1.6 kgf•m, 12 lbf•ft)
5. Pour the recommended transmission oil slowly
through the oil filler hole.
Suggested transmission oil:
Honda 4-stroke motorcycle oil or equivalent
Viscosity: SAE 10W-30
API Classification: SG or higher
(except oils labeled as energy conserving on the
circular API service label)
JASO T 903 standard: MA
Capacity:
0.49 liter (0.52 US qt, 0.43 Imp qt) at draining
0.55 liter (0.61 US qt, 0.51 Imp qt) at disassembly
(1) OIL FILTER COVER (2) BOLTS
Install and tighten the oil filter cover bolts.
Secure the drain plug and filter cap with lock wire.
Fill the crankcase with the recommended oil (see
previous page).
(1)
(2)
(2)
(1)
(1)