HRC NSF250R 2012, Owner'S Manual & Parts List

Page: 14 / 300

1-4
Operating Instruction
Reconditioned Machine
• After replacing the cylinder and crankshaft, oper-
ate the machine for the first 95 km (57 mi; about
one hour) observing the same cautions as for a
new machine.
• Use same break-in procedure and after break-in
check:
Below 6,000 min
-1
(rpm) ......... About 20 km (15 mi)
(About 15 minutes)
Below 8,000 min
-1
(rpm) ......... About 10 km (6 mi)
Below 10,000 min
-1
(rpm) ....... About 10 km (6 mi)
Above 10,000 min
-1
(rpm)....... About 10 km (6 mi)
Total: About 50 km (30 mi; about 30 minutes)
(1) CLUTCH LEVER
Controls
Clutch
1. The normal clutch lever free play is 10 – 20 mm
(0.4 – 0.8 in) measured at the tip of the lever.
(1) LOCK NUT (2) ADJUSTER
(A) INCREASE (B) DECREASE
2. Minor adjustments can be made with the cable
end adjuster.
Loosen the lock nut and turn the adjuster. Turning
the adjuster in direction A will increase free play,
turning the adjuster direction B will decrease free
play. After adjustment, tighten the lock nut.
If the adjuster is threaded out near its limit or the
correct free play cannot be reached, turn the
adjuster all the way in and back out one turn.
Tighten the lock nut and make the adjustment
with the integral cable adjuster.
(1)
(2)
(B)
(A)
(1)