HRC NSF250R 2012, Owner'S Manual & Parts List

Page: 115 / 300

4-49
Engine Servicing
(1) OUTER GUIDE
(2) NEEDLE BEARING
(1) CLUTCH OUTER
(2) THRUST WASHER
(1) CLUTCH CENTER
(2) THRUST WASHER (3) LOCK WASHER
(4) "OUTSIDE" MARK
(1) CLUTCH CENTER HOLDER
Install the clutch center then install the lock washer
with its "OUTSIDE" mark facing out.
Apply engine oil to the clutch center lock nut threads
and seating surface, then install it.
Hold the clutch center with the following tool, tight-
en the lock nut to the specified torque.
Tool:
Clutch center holder
07724-0050002
Torque: 54 N•m (5.5 kgf•m, 40 lbf•ft)
Installation
Apply molybdenum oil solution to the clutch outer
guide sliding surface.
Apply engine oil to the clutch outer sliding surface.
Install the clutch outer guide and needle bearing to
the mainshaft.
Install the clutch outer and thrust washer.
(1)
(2)
(2)
(3)
(1)
(1)
(4)
(1)
(2)
(1) JUDDER SPRING SEAT
(2) JUDDER SPRING (3) CLUTCH DISC B
(4) CLUTCH PLATE (5) CLUTCH DISC A
(1) JUDDER SPRING SEAT
(2) JUDDER SPRING (3) CLUTCH DISC B
(4) CLUTCH PLATE (5) CLUTCH DISC A
Install the right crankcase cover (page 4-52).
Apply clean engine oil to the clutch discs and plates.
Install the judder spring and judder spring seat to
the clutch center.
Install the clutch disc B (larger I.D. disc).
Install the clutch disc A and plates alternately onto
the clutch center starting with the clutch plate.
(1)
(2)
(3)
(4)
(5)
(1) (2) (4)
(3) (5)