HRC NSF250R 2012, Owner'S Manual & Parts List

Page: 125 / 300

4-59
Engine Servicing
Transmission Holder Bearing Replacement
Drive the holder bearings with their sealed side facing the right crankcase cover.
(1) DRIVER (2) ATTACHMENT
Drive the countershaft bearing out using the follow-
ing tools.
Tools:
Driver
07749-0010000
Attachment, 42 x 47 mm 07746-0010300
Pilot, 20 mm 07746-0040500
(1) COUNTERSHAFT BEARING
(2) MAINSHAFT BEARING (3) SHIFT DRUM BEARING
(4) BOLTS (5) SET PLATES Remove the mainshaft bearing using the following
tools.
Tools:
Bearing remover set
07936-3710001
– remover handle 07936-3710100
– bearing remover 07936-3710600
– remover weight 07741-0010201
Turn the mainshaft and countershaft bearing inner
race with your finger. Check that the bearing turns
smoothly and quietly.
Replace the bearing if it does not turn smoothly or
loosely fits in the bearing holder.
Remove the bolts and set plates.
Remove the shift drum bearing.
Drive the countershaft bearing out of the transmis-
sion holder.
(1)
(2)
(5)
(4)
(5)
(4)
(3)
Apply locking agent
To be bottomed
To be bottomed
To be bottomed
Apply locking agent
(1)
(2)