6-1
6. Electrical Servicing
(1) 5P (BLACK) CONNECTOR
Charging System Inspection
Alternator Charging Coil
Disconnect the regulator rectifier 5P (Black) connec-
tor.
Measure the resistance between the terminals of the
wire harness side.
Connection: White – Yellow
Standard: 0.7 – 3.0
Ω
(20˚C/68˚F)
(1) 6P (NATURAL) CONNECTOR
If the resistance is out of specification, disconnect
the alternator 6P (Natural) connector and measure
the resistance between the terminals of the alterna-
tor side connector.
If the measured resistance at regulator/rectifier 5P
(Black) connector is incorrect and the alternator 6P
(Natural) connector is correct, check the wire har-
ness.
If the resistance is still out of specification, replace
the stator assembly.
(1) 4P (RED) CONNECTOR
Regulated Voltage Inspection
Disconnect the service check 4P (Red) connector.
Connect the digital voltmeter to the Black (+) and
Green (–) terminals.
Start the engine, check for regulated voltage.
Standard: 13.5 – 14.5 V/3,000 min
-1
(rpm)
(1)
(1)
(1)
Summary of Contents for NSF250R 2012
