HRC NSF250R 2012, Owner'S Manual & Parts List

Page: 108 / 300

(1) BREATHER SEPARATOR
(2) BOLTS
(1) PACKING
(2) PACKING B
If the breather separator was removed, install it to
the cylinder head cover.
Apply a locking agent to the breather separator bolt
threads, then install and tighten the bolts.
Install the cylinder head cover packing A and pack-
ing B to the cylinder head cover.
(1) WASHER
(2) "UP" MARK
4-42
Engine Servicing
(1) CYLINDER HEAD COVER
(2) BOLTS
(1)
(2)
(1)
(2)
Install the washers with it's "UP" mark facing up.
Install and tighten the cylinder head cover bolt to
the specified torque.
Torque: 10 N•m (1.0 kgf•m, 7 lbf•ft)
(1) TIMING HOLE CAP
(2) O-RING
Apply grease to the new O-ring and install it onto
the crankshaft hole cap. Install and tighten the
crankshaft hole cap to the specified torque.
Torque: 15 N•m (1.5 kgf•m, 11 lbf•ft)
Apply grease to the new O-ring and install it onto
the timing hole cap. Install and tighten the timing
hole cap to the specified torque.
Torque: 6 N•m (0.6 kgf•m, 4.4 lbf•ft)
(2)
(1)
(2)
(1)
(2)
(1)
(2)
(1)
(1) CRANKSHAFT HOLE CAP
(2) O-RING