HP T9576G06, Management Manual

Page: 6 / 778

Contents
SNMP Configuration and Management Manual — 424777-006
iv
4. Introduction to SCF for the SNMP Agent
Part II. SCF for the SNMP Agent
4. Introduction to SCF for the SNMP Agent
Tasks You Can Perform With SCF 4-1
SCF and the DSM Family of Products 4-2
Subsystem Programmatic Interface 4-2
The Subsystem Control Point 4-2
Objects 4-3
Object Attributes 4-3
Object Hierarchy 4-4
Object States 4-4
The PROCESS Object 4-5
Naming Conventions: PROCESS Object 4-5
PROCESS Object States 4-6
PROCESS Object Attributes 4-6
Default PROCESS Object 4-6
The ENDPOINT Object 4-8
Naming Conventions: ENDPOINT Object 4-8
ENDPOINT Object States 4-9
ENDPOINT Object Attributes 4-10
Default ENDPOINT Object 4-10
The PROFILE Object 4-12
Naming Conventions: PROFILE Object 4-12
PROFILE Object States 4-14
PROFILE Object Attributes 4-14
Default PROFILE Object 4-14
The TRAPDEST Object 4-16
Naming Conventions: TRAPDEST Object 4-16
TRAPDEST Object States 4-17
TRAPDEST Object Attributes 4-18
Default TRAPDEST Objects 4-18
SCF-Configured Trap Destination Limitations: Broadcast Only 4-19
Running SCF 4-21
Entering SCF Commands 4-21
SCF Commands for Managing Your SCF Session 4-21
SCF Commands for Managing a Subsystem 4-22
Sensitive and Nonsensitive Commands 4-23
Command Modifiers 4-23
Entering Multiple Commands at a Prompt 4-23