HP T9576G06, Management Manual, Page: 643 / 778

Ethernet Subagent
SNMP Configuration and Management Manual — 424777-006
14- 7
Starting the Ethernet Subagent
startup-parameter
is one of the parameters listed next with which you can control attributes of the
Ethernet Subagent process.
-a [\node.]$agent-process
is the name of the SNMP agent process with which you want the Ethernet
Subagent to communicate.
The default value is $ZSNMP on the same node as the subagent.
-b backup-cpu-number
is the processor number in which a backup process is to be created.
The default value is -1, indicating that no backup is to be created.
-c [\node.]$collector-process
is the name of the collector to which the subagent is to send EMS event
messages it generates.
The default is $0, the primary EMS collector, on the local node.
-k keep-alive-timer
specifies the time interval, in seconds, between attempts by the Ethernet
Subagent to reconnect to a TCP/IP, SNMP agent, backup, or EMS collector
process that is in the disconnected state.
Note. Each of the Ethernet Subagent startup parameters corresponds to one of its private
(zesa) MIB objects, as indicated in the following syntax diagram and described in
Configuring a Running Ethernet Subagent on page 14-9.
-a [\node.]$agent-process |
zesaAgentName
-b backup-cpu-number |
zesaBackupCPU
-c [\node.]$collector-process | zesaEmsCollectorName
-k keep-alive-timer |
zesaKeepAliveTimer
-r refresh-timer |
zesaRefreshTimer
-s $scp-process | zesaScpProcess
-t $tcpip-process |
zesaTcpIpProcess
Note. EMS event generation is always enabled at process startup. To disable the
sending of events, set the value of the zesaEmsCollectorState object to disabled (3)
once the Ethernet Subagent is running.