TCP/IP Subagent
SNMP Configuration and Management Manual — 424777-006
8- 83
1006: ZTSA-EVT-BACKUP-OBJ-UNAVAIL
ZEMS-VAL-reason
indicates the reason the backup TCP/IP Subagent process has become
unavailable. The DDL AS clause associated with this value is inserted in the
message text following “cause.”
ZTSA-VAL-STATE-state
indicates the previous state of the backup TCP/IP Subagent process. The DDL AS
clause associated with this value is inserted in the message text following
“previous state.”
ZTSA-VAL-STATE-DISCONNECTED
indicates the current state of the backup TCP/IP Subagent process. The DDL AS
clause of this value (“disconnected,” described above) appears in the message text
following “previous state.”
ztsaProcessName
is the name of the underlying process whose failure caused the backup TCP/IP
Subagent process to go out of service. The name of the TCP/IP Subagent process
specified for the subagent’s private ztsaProcessName MIB object is inserted in the
message text following “underlying object.”
Value of
ZEMS-TKN-CHANGE-REASON
Associated Text (DDL AS Clause) and
Meaning
ZEMS-VAL-UNDERLYING-FAILED
“underlying-serv-failed” indicates that an
underlying service the backup TCP/IP
Subagent process depends on has failed.
ZEMS-VAL-OPERATOR-INITIATED
“operator-initiated” indicates that an operator
has taken the backup TCP/IP Subagent
process out of service.
Value of
ZEMS-TKN-STATE-PREVIOUS
Associated Text (DDL AS Clause)
ZTSA-VAL-STATE-CONNECTED
“connected” indicates a normal operational
state.
ZTSA-VAL-STATE-DISCONNECTED
“disconnected” indicates a nonoperational
state where subagent function is not
available.
ZTSA-VAL-STATE-ENABLED
“enabled” indicates that the process has been
set by an operator such that the subagent
immediately attempts to restore it to a
connected state.
ZTSA-VAL-STATE-DISABLED
“disabled” indicates that the process has
been taken out of service explicitly by an
operator setting the ztsaBackupState MIB
object to “disabled.”
Summary of Contents for T9576G06
