HP T9576G06, Management Manual, Page: 260 / 778

TCP/IP Subagent
SNMP Configuration and Management Manual — 424777-006
8- 30
Interfaces Group
When the state object has been placed in the “Enabled” state, the TCP/IP Subagent
attempts to connect to the underlying process.
•
If the connection attempt is successful, the object enters the “Connected” state.
•
If the connection attempt fails, the object enters the “Disconnected” state. The
TCP/IP Subagent continues to attempt to reconnect at the rate specified for the
ztsaKeepAliveTimer object.
Interfaces Group
The Interfaces group contains information about the interfaces of the TCP/IP
subsystem being managed. An interface is defined as the association between a
TCP/IP subnet and the underlying I/O process that controls access to the LAN or X25
network.
The Interfaces group consists of one scalar object and one table (the ifTable). The
objects identified by a check mark in the following list are objects for which there is
corresponding HP instrumentation:
iso (1)
identified-organization (3)
dod (6)
internet (1)
mgmt (2)
mib-II (1)
interfaces (2)
√
ifNumber (1)
√
ifTable (2)
√
ifEntry (1)
√
ifIndex (1)
√
ifDescr (2)
√
ifType (3)
√
ifMtu (4)
√
ifSpeed (5)
√
ifPhysAddress (6)
√
ifAdminStatus (7)
ifOperStatus (8)
√
ifLastChange (9)
√
ifInOctets (10)
√
ifInUcastPkts (11)
√
ifInNUcastPkts (12)
√
ifInDiscards (13)
√
ifInErrors (14)
√
ifInUnknownProtos (15)
√
ifOutOctets (16)
√
ifOutUcastPkts (17)
√
ifOutNUcastPkts (18)
√
ifOutDiscards (19)
√