HP T9576G06, Management Manual

Page: 701 / 778

Ethernet Subagent
SNMP Configuration and Management Manual — 424777-006
14 -65
3014: ZESA-EVT-TAKEOVER-BY-BACKUP
3014: ZESA-EVT-TAKEOVER-BY-BACKUP
ZESA-EVT-TAKEOVER-BY-BACKUP
is the event number (3014). The DDL AS clause of this value (“Takeover-by-
backup”) appears in the message text.
ZESA-VAL-TF-TAKEOVER
identifies the type of transient fault that occurred. For this event, the DDL heading
of the value (“Primary-stopped”) appears in the message text.
Cause. The subagent primary process terminated. The recognized causes are either
process termination or primary processor failure.
Effect. The backup process takes over the subagent primary role using the last known
configuration parameters. Any transactions that were in progress at the time of the
primary failure are lost.
The new primary attempts to restart a backup process in the former primary processor
according to the zesaKeepAliveTimer interval.
Recovery. If the cause was a processor failure, change the backup processor
(zesaBackupCPU) to a currently active processor.
If the cause was a primary process failure, examine the event log to determine the
underlying cause for the process abend.
Sample Message
98-07-08 11:31:35 \NOVA.$ZESA TANDEM.ETHSA.G06 003014
Takeover by backup process, Primary-stopped
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER
ZEMS-TKN-TXFAULT-TYPE
Value
<1> ZESA-EVT-TAKEOVER-BY-BACKUP
<2> ZESA-VAL-TF-TAKEOVER
Conditional Tokens
None
Message Text
<1>, <2>