HP T9576G06, Management Manual

Page: 192 / 778

SCF Commands for the SNMP Agent
SNMP Configuration and Management Manual — 424777-006
5- 24
INFO TRAPDEST Command
Example: INFO PROFILE
The following example displays the attribute values of all the entries in the
authentication table used by NonStop agent process $ZSNMP:
-> INFO PROFILE $ZSNMP.*
SNMP Info PROFILE
Name *Access *Hostaddr *Community
$ZSNMP.#DEFAULT READONLY 0.0.0.0 public
$ZSNMP.#LANMGR READWRITE 130.252.86.10 Private
INFO TRAPDEST Command
Use the INFO TRAPDEST command to display the current attribute values for a trap
destination definition.
[$agent-process.]#trapdest-name
identifies the trap destination definition whose attribute values you want to display.
$agent-process
identifies the NonStop agent process to which the TRAPDEST object belongs.
It consists of a dollar sign ($) followed by one to five alphanumeric characters,
the first of which must be alphabetic.
#trapdest-name
identifies the TRAPDEST object. It consists of a pound sign (#) followed by one
to seven alphanumeric characters, the first of which must be alphabetic.
DETAIL
specifies that the display contain additional information about the object set.
Example: INFO TRAPDEST
The following example displays information about all the trap destinations defined for
NonStop agent process $ZSNMP:
-> INFO TRAPDEST $ZSNMP.*
SNMP Info TRAPDEST
Name *Network *Hostaddr *Community
$ZSNMP.#TRAP \EAST.$ZTC0 130.252.86.10 Tandem
$ZSNMP.#REMOTE \WEST.$ZTC1 130.252.86.241 public
INFO TRAPDEST [$agent-process.]#trapdest-name [, DETAIL ]