HP T9576G06, Management Manual, Page: 549 / 778

Trap Multiplexer Subagent/Manager
SNMP Configuration and Management Manual — 424777-006
12 -57
Application Source Code
/* These defines are used for zems structs to shorten names */
#define SPIERRDEF zspi_ddl_error_def
/* spi error */
short spi_err;
/* declare the SSIDs using the type defs from the DDL output */
zems_val_ssid_def emsssid;
ztmx_val_ssid_def tmxssid;
/************************************************************************/
#pragma PAGE "send_spi_cmd()"
/* Determines the used portion of a SPI buffer prepared by another
procedure. Sends the SPI command to the distributor and checks the
command response
Input : SPI buffer and distributor file number
Return : None
*/
void send_spi_cmd (char* spi_buf, short distr) <-- 5
{
short ccval; /* for cc return from writeread */
short ibuflen = ZCOM_VAL_MAX_RSP_BUFLEN;
short used_len;
short spi_ret_code;
/* Determine how much buffer was used */
spi_err = SSGETTKN ((short*)spi_buf, /* buffer */
ZSPI_TKN_USEDLEN, /* token-id */
(char*)&used_len); /* token-value */
if (spi_err != ZSPI_ERR_OK)
DEBUG();
/* Send the used part to the distributor */
ccval = WRITEREADX(distr, /* file-number */
(char*)spi_buf, /* buffer */
used_len, /* write-count */
ZCOM_VAL_MAX_RSP_BUFLEN); /* read-count */
if (ccval != CCE)
DEBUG();
/* reset the buffer */
spi_err = SSPUTTKN((short*)spi_buf, /* buffer */
ZSPI_TKN_RESET_BUFFER, /* token-id */
(char*)ibuflen); /* token-value */
if (spi_err != ZSPI_ERR_OK)
DEBUG();
/* response is in the buffer, check for the return code */
spi_err = SSGETTKN ((short*)spi_buf,
ZSPI_TKN_RETCODE,
(char*)&spi_ret_code, 1);
if (spi_err != ZSPI_ERR_OK)
DEBUG();
if (spi_ret_code != ZSPI_ERR_OK)
DEBUG();
} /* send_spi_cmd */
Example 12-3. Sample Application Source Code (page 2 of 14)