HP T9576G06, Management Manual

Page: 623 / 778

IPX/SPX Subagent (G-Series)
SNMP Configuration and Management Manual — 424777-006
13 -61
1006: ZISA-EVT-BACKUP-UNAVAILABLE
ZISA-VAL-STATE-DISCONNECTED
is the current state. The DDL AS clause of this value (“disconnected”) appears in
the message text following “current state:”.
ZEMS-TKN-CONTENT-USER
is assigned the value “undefined” in the message text following “user content:”.
ZISA-VAL-DISCONNECTED
is the value assigned to the ZISA-TKN-OBJ-STATE token.
ZISA-VAL-reason
is one of the following values, assigned to the ZISA-TKN-OBJ-STATE-REASON
token:
ZISA-VAL-OPERATOR-REQUEST
ZISA-VAL-RESOURCE-PROBLEM
Cause. The cause depends on the reason for the stoppage:
Effect. The subagent is no longer running in fault-tolerant mode.
Recovery. Correcting the situation depends on the reason for the stoppage:
Sample Message
96-01-30 16:50:50 \COMM.$ZISA TANDEM.IPXSA.D30 001006 Object
unavailable backup-process-resource-object
- \COMM.$ZISA, event number:
backup-unavailable, cause: operatorrequest,
previous state: connected, current state:
disconnected, user content: undefined
Change Reason Cause
operatorrequest The value of tdmNwSaBackupState object was deliberately
set to
disconnected
.
resource-problem The CPU in which the backup process was running failed, or
a critical resource was not available.
Change Reason Recovery
operatorrequest No action is required because the stoppage was deliberate.
resource-problem If a CPU failure caused the problem, use a Set operation to
change the value of tdmNwSaBackupCPU to an available
CPU, then Set the value of tdmNwSaBackupState to
connected
. You can also reload the CPU that failed, and
the subagent backup process automatically restarts.