HP T9576G06, Management Manual, Page: 216 / 778

SNMP Agent PTrace Facility
SNMP Configuration and Management Manual — 424777-006
6 -8
NEXT Command
date
is an optional parameter in the following form:
mm/dd/yyyy
If
date
is omitted, it is replaced by the date found in the previously displayed
record. If there is no previously displayed record, the date is taken from the
trace file header (start of trace).
time
represents a 24-hour-clock time in the following form:
hh:mm[:ss[.tttttt]]
You must specify the hours (
hh
) and minutes (
mm
). You can optionally specify
the seconds (
ss
) and microseconds (
tttttt
).
Once a record is found that has a timestamp greater than or equal to the
timestamp specified, the
count
parameter (or function key that is pressed, as
discussed in the following subsection) determines the number of records sent to
the output.
Considerations: PTrace NEXT Command
•
Pressing the BREAK key terminates the NEXT command search or display.
•
The function keys on an HP 6530 terminal can be used as shorthand for various
NEXT
count
commands. For example, pressing the F6 function key displays six
records.
Examples: PTrace NEXT Command
1. The following example sets detail to on to display the information and then displays
the next record (record 1):
?DETAIL ON
Ptrace Detail Format: ON
?NEXT
11:27:50.630 >000.000 #1 Common kernel
SSN : 155
Product banner : SNMP Agent (T9576D23 15MAR97 AAG)
Kernel banner : COM-KRNL (T6563D20 01SEP96 T07L^AAS)
Record 1 is written by Common Kernel into the trace file. This is the only record
that differs from rest of the records written by the NonStop agent.
Note. The year field must be four digits.