HP T9576G06, Management Manual, Page: 202 / 778

SCF Commands for the SNMP Agent
SNMP Configuration and Management Manual — 424777-006
5- 34
STOP TRAPDEST Command
$agent-process
identifies the NonStop agent process to which the PROFILE object belongs. It
consists of a dollar sign ($) followed by one to five alphanumeric characters,
the first of which must be alphabetic.
#profile-name
identifies the PROFILE object. It consists of a pound sign (#) followed by one
to seven alphanumeric characters, the first of which must be alphabetic.
Considerations: STOP PROFILE
When you STOP a PROFILE object, the table entry it represents is no longer part of
the current authentication scheme. To reactivate the table entry so that it is available
for use by the NonStop agent, issue a START command against the object.
Example: STOP PROFILE
The following example inactivates an entry in the authentication table used by NonStop
agent process $ZSNMP:
-> STOP PROFILE $ZSNMP.#LANMGR
STOP TRAPDEST Command
Use the STOP TRAPDEST command to disable the sending of trap messages to a
specific trap destination.
[$agent-process.]#trapdest-name
identifies the trap destination being inactivated.
$agent-process
identifies the NonStop agent process to which the TRAPDEST object belongs.
It consists of a dollar sign ($) followed by one to five alphanumeric characters,
the first of which must be alphabetic.
#trapdest-name
identifies the TRAPDEST object. It consists of a pound sign (#) followed by one
to seven alphanumeric characters, the first of which must be alphabetic.
Considerations: STOP TRAPDEST
Traps being generated by or received for forwarding by the NonStop agent when a
TRAPDEST object is stopped are not sent to that particular destination.
STOP TRAPDEST [$agent-process.]#trapdest-name