HP T9576G06, Management Manual

Page: 188 / 778

SCF Commands for the SNMP Agent
SNMP Configuration and Management Manual — 424777-006
5- 20
DELETE TRAPDEST Command
$agent-process
identifies the NonStop agent process to which the PROFILE object belongs. It
consists of a dollar sign ($) followed by one to five alphanumeric characters,
the first of which must be alphabetic.
#profile-name
identifies the PROFILE object. It consists of a pound sign (#) followed by one
to seven alphanumeric characters, the first of which must be alphabetic.
Example: DELETE PROFILE
The following example stops and deletes the #UBLAN entry in the authentication table
being used by NonStop agent process $ZSNMP:
-> STOP PROFILE $ZSNMP.#UBLAN
-> DELETE PROFILE $ZSNMP.#UBLAN
DELETE TRAPDEST Command
Use the DELETE TRAPDEST command to remove a trap destination from a NonStop
agent configuration.
[$agent-process.]#trapdest-name
identifies the trap destination being removed from the NonStop agent configuration.
$agent-process
identifies the NonStop agent process to which the TRAPDEST object belongs.
It consists of a dollar sign ($) followed by one to five alphanumeric characters,
the first of which must be alphabetic.
#trapdest-name
identifies the TRAPDEST object. It consists of a pound sign (#) followed by one
to seven alphanumeric characters, the first of which must be alphabetic.
Example: DELETE TRAPDEST
The following example removes all the trap destinations defined for NonStop agent
process $ZSNMP:
-> DELETE TRAPDEST $ZSNMP.*
DELETE TRAPDEST [$agent-process.]#trapdest-name