HP T9576G06, Management Manual, Page: 488 / 778

Host Resources Subagent
SNMP Configuration and Management Manual — 424777-006
11- 112
003: ZHRM-EVT-HRM-SA-IO-ERR
ZHRM-TKN-FS-ERR
contains the file system error code and subcode, documented in the Guardian
Procedure Errors and Messages Manual . The token is based on this structure:
DEFINITION ZHRM-DDL-FS-ERR.
02 ERR-CODE TYPE ZSPI-DDL-INT
HEADING 'error code'
02 ERR-SUBCODE TYPE ZSPI-DDL-INT
HEADING 'error subcode'
END.
ZHRM-TKN-FILE-NAME
contains the name of the file with which the subagent experienced an I/O error.
This token is of type ZSPI-TYP-STRING.
ZHRM-TKN-ERR-TEXT
contains text describing the error. This token is of type ZSPI-TYP-STRING.
Cause. The subagent process encountered an I/O error. The cause is most likely the
assignment of an incorrect agent process name at subagent startup or a stopped
SNMP agent process.
Effect. The subagent cannot function.
Recovery. Investigate the reported error code and subcode and then correct the
condition they describe. If the error code is 14 (file does not exist), the subagent could
not open the SNMP agent process, and you should ensure that the SNMP agent is
running or that you specified the correct agent process name when starting the
subagent. For more detailed information, including recovery actions, refer to the
Guardian Procedure Errors and Messages Manual .
If the subagent was running as a process pair when the I/O error occurred, the backup
process takes over. This new primary process tries to establish communication with the
SNMP agent. If the process cannot establish communication, it retries every 10
minutes for a period of 1 hour and then stops.
Sample Message
95-03-10 16:34:20 \COMM.$HMSA TANDEM.HRM.D21 000003 Transient Fault -
Host Resources Subagent process
\COMM.$HMSA,
event number: Process I/O error,
fault type: IO error, FS error:
14 --
subcode: 0, File Name:
$zsnmp.#PEER,
Additional Info: Error in opening
agent
process