HP T9576G06, Management Manual

Page: 460 / 778

Host Resources Subagent
SNMP Configuration and Management Manual — 424777-006
11 -84
Sample Data
Sample Data
Time, zhrmThrRAMTotal, zhrmThrRAMUse, zhrmThrRAMPercentUse,
zhrmThrRAMTrapEnable, zhrmThrRAMHighValue,
zhrmThrRAMLowValue
05/22/95 10:19:41, 64, 59, 92, ramTrapsEnabled, 90,
45
Time, zhrmThrRAMIndex, zhrmThrRAMDescr, zhrmThrRAMAllocationUnits,
zhrmThrRAMSize, zhrmThrRAMUsed,
zhrmThrRAMAllocationFailures
05/22/95 10:20:10, 1, CPU00 (NSR-L) running D20.06, 4096, 8192, 8169,
4047
Time, zhrmThrDiskTotal, zhrmThrDiskUse, zhrmThrDiskPercentUse,
zhrmThrDiskTrapEnable, zhrmThrDiskHighValue,
zhrmThrDiskLowValue
05/22/95 10:20:48, 4047, 2824, 69, diskTrapsEnabled, 90,
45
Time, zhrmThrDiskIndex, zhrmThrDiskDescr, zhrmThrDiskAllocationUnits,
zhrmThrDiskSize, zhrmThrDiskUsed,
zhrmThrDiskAllocationFailures
05/22/95 10:21:15, 1, $DSM-P(4230-1C), 2048, 316470, 311818,
0
05/22/95 10:21:15, 2, $DSM2-P(4220-1), 2048, 146726, 145449,
0
zhrmThreshold Group Maintenance
Most zhrmThreshold group values are derived from hrStorage group values as
Table 11-13 describes. Values in the zhrmThreshold group are refreshed immediately
after hrStorage group values are refreshed. Refer to hrStorage Group Maintenance on
page 11-34 for information about when hrStorage group values are refreshed.
The values of zhrmThrRAMTrapEnable and zhrmnThrDiskTrapEnable are always set
to 1 at subagent startup. The values of these objects do not change while the subagent
is running unless you set them.
The values of the following objects are initialized at subagent startup in accord with the
startup parameters indicated:
zhrmThrRAMHighValue (-h startup parameter)
zhrmThrRAMLowValue (-i startup parameter)
zhrmThrDiskHighValue (-h startup parameter)
zhrmThrDiskLowValue (-i startup parameter)
The values of these objects also do not change while the subagent is running unless
you set them.